ROCKWOOL FirePro CB Ablative Coating – 5 Litre
ROCKWOOL FirePro CB Coating is a water-based ablative coating for repairing and resealing exposed or damaged areas of FirePro CB50 and CB60 coated batts. It can be applied by brush or spray and dries to a white finish.
£62.92 inc VAT
Description
ROCKWOOL FirePro CB Ablative Coating – 5 Litre restores the protective coating where FirePro coated batts have been cut, trimmed or damaged during installation, helping the completed seal match the tested system specification.
Key features
- Water-based ablative coating for FirePro CB50 and CB60 systems
- Suitable for brush or spray application
- Dries to a clean white surface finish
- Used to coat exposed stone wool edges and repair minor coating damage
- Supports the fire and smoke performance of the complete tested batt seal
Typical applications
Apply to cut edges, repaired areas and any surfaces identified in the ROCKWOOL coated-batt installation detail.
Installation note: Prepare the surface and apply the specified wet-film coverage. Allow to dry in accordance with the current product data sheet before inspection.
Additional information
| Color | White |
|---|---|
| Size | 5L |
Shop the manufacturer
More from Rockwool
Need Help With This Product?
If you are unsure whether this product is suitable for your application, contact Fire Protection Direct for help locating the relevant product information and manufacturer documentation.
